Main Technical Characteristics
Since the front door has plenty of perforation orifices, almost 100% of heated air is removed from the server cabinet in the most efficient manner. It enables the user to streamline airflow distribution. Eventually, you’ll get optimal cooling of your hardware.
The ergonomic push lock makes the product look exceptionally classy while facilitating access to the vital components of your setup.
The brush-type cable gland protects the devices from potential electrical damage caused by fine particles, e.g., dust.
Both the front and rear side of the cabinet are fitted with lock-up, dismountable panels that come together with 2 keys. Their aim is to increase protection against various threats and secure your environment.
Detachable panels will allow you to install or service a broad spectrum of devices in the twinkle of an eye.
Configurable mounting rails with special U-markings and square orifices make it possible to substantially accelerate installation and correctly position all the components of your environment. These rails are suitable the vast majority of appliances.
Four flexible standing legs will assist you in transforming a floor-standing cabinet into a wall-mounted cabinet. Nonetheless, you mustn’t exceed the established maximum load value, i.e., 133 pounds.
The product also comes with a full-fledged kit of 20 M6 nuts and screws, which makes installing the cabinet as easy as ABC. You also won’t have to buy any additional fasteners.
An internal depth of 35 inches (900 mm) is usually regarded as the optimum value. It’ll enable you to install a wide array of devices, namely telecommunications equipment, digital video recorders, routers, switches, etc. On top of that, you’ll have proper airflow distribution and cable power. You can also easily retrofit your
server environment, where necessary.
The base model is black in color and features the following components:
- Cooler in the upper section of the product;
- Dismountable mesh front door and side panels;
- 1 power distribution unit;
- 2 fixed shelves;
- 4 movable casters;
- Mounting rails with U-markings;
- A brush panel for laying cables in the upper and lower sections of the rack;
- A set of nuts and screws.
• Height of the enclosure: 12U
• Width (External): 24″(600mm);
• Depth (External): 35″(900mm)
Framework:
• Prefabricated profile sections.
Cable input:
• Top and bottom have 2 dust-tight brush panels with cable managers.
Active ventilation:
• Passive – convection heat flow due to perforation front and rear doors
• Active – by setting in the top fan module (all models)
IP protection:
• IP20: Mesh front door and mesh side panels
Capacity:
• Static load not exceeding 133 lbs (on casters) or 250 lbs (on feet).
Material:
• Rolled steel profile
• Frame thickness 1.5mm; 19” profiles 1.5mm; other components parts 1.0-1.2mm.
Coating:
• Powder paint with degreasing and anticorrosive phosphate
Color:
• Black: RAL9005
Kit contents: 1 fan, 2 Brush cable entries, 1 PDU,1 fixed shelf, 4 casters, 4 feet, 3 latch locks, set of cage nuts and bolts (20 pcs).
