Wall mounted server rack SYSRACKS WS is 19-inch platform design for housing telecommunications and server equipment for SOHO (Small office/home office) segment.
Office and home space is a value to be used in a smart fashion. Installation of floor mounted server rack is not always an option as it is one more obstacle for free moving around.
WS server cabinet portability is achieved via vertical load of 19” equipment, while wall mount option save the space.
Modern high performance servers generate heat in big quantities. So the choice of server cabinet’s design which ensures stability of equipment performance and comfort operations shall take into account this criteria which is to say the natural conventional withdrawal of heat from the inside of the rack body.
NO active ventilation is NOT just about saving power, BUT it also facilitates noise control and that is important for office and home use.
SYSRACKS WS is a wall mounted 6U server cabinet (800 mm. depth). These features are enough to accommodate server, modem and switch which are all needed to set up a server type LAN with Internet access.
Budgetary savings here will be around 50% in complaince with the floor mounted cabinet.
You would like to place this server cabinet at the foreground to stress the IT technology outlook of your Company!
One more reason you would like to choose SYSRACKS cabinets in your projects is a flat compact packaging!
It is convenient for both: storage and moving.
The construction is supplied unassembled and this allows to save between 50% and 70% of total space!
Three Undisputable Advantages:
1. Saving between 50% and 70% of the rack space during its storage and transportation.
2. Assembled construction allows to deliver and mount the rack at the technical facilities with narrow doorways and/or at the facilities with no cargo elevators.
|Types of produced sizes||
|Protecting by IP||
Base case system includes: 19" enclosure ,a set of nuts/screws/washers (20 un.).
|Marks||Descriptions||Package (CTNS)||G.WT (KGS)||Meas (CBM)|
|WS 6806.733||19" wall mounted server enclosure 6U 500x305x850||1||18,4||0,15|
For drawing up of design documentation provide drawings in DWG format.
Nowadays, the modern server equipment
is much faster and more powerful than in the past.
As a result, a lot of
heat is generated in working space which can affect the performance of whole
system, unfortunately, in negative way.
That is why, one of the most important
factors impacting the life and reliability of high-priced equipment is the
temperature regime in a server rack.
Moreover, most of servers are integrated
in public and office environment, were the non-stop cooling fan noise prevents
focusing on accomplishing work,
but overheating of the server equipment can cause system crushes and even data loss.
– the automatic
control of ambient temperature regime and active ventilation in server racks.
device reads off two temperature gauges, installed in different areas,
engages 4 fan cooling panel running only when the temperature surpasses the
save operating limit.
The Air Control
board is installed into the top of the rack, which save 1U internal space.
AIR CONTROL SYSTEM :
The control unit has three types of modes:
While pressing and hold the SET button, it switches to adjustment mode. Hold down the SET button more than 3 seconds, reset to factory default settings. A single press button SET in regulatory regimes or initialization switches to the operating mode. Use the UP- button and DOWN- button to modify the selected parameter.
|F1||A channel temperature setting||.-19,9C +99,9C||12,0||Press and hold the SET button to select the setting temperature. Use the up and down set temperature value. Short press SET to set the default settings|
|F2||A channel temperature hytersis||1,0C - 20,0C||2,0||Press and hold the SET button to select the setting range of operation. Use the up and down button peak value. Short press SET to set the default settings|
|F3||B channel temperature setting||.-19,9C +99,9C||12,0||Press and hold the SET button to select the setting temperature. Use the up and down set temperature value. Short press SET to set the default settings|
|F4||B channel temperature hytersis||1,0C - 20,0C||2,0||Press and hold the SET button to select the setting temperature. Use the up and down having set the temperature value. Short press SET to set the default settings|
|F5||Temperature correction||-10+10||0,0||The calibration function (correction) of reading between the actual temperature and the determined unit|
|F6||Start-up delay||0-5||2,0||Press and hold the SET button to select the setting delay. Use the up and down to set the desired value. Short press SET to set the default settings.|
|E1||A channel error||A channel self-testing error|
|E2||B channel error||B channel self-testing error|